Panasonic AE2000U Projector Review

If you’ve followed the progress of my new theater in my previous articles, you know the display is a Panasonic AE2000U projector. This unit is a 3 LCD design utilizing the same D7 C2Fine panels found in the Epson Ultra-Black series as well as the Sanyo line of home theater models. Native resolution is 1920x1080. There are 3 HDMI inputs which accept both 60 and 24Hz refresh rates. The projector’s actual refresh is 60Hz or 96Hz for 24p material. The cadence used for 24p is 4:4 where each frame is simply repeated 4 times. I’ll talk a bit more in detail about this later. Two component, one composite and one S-video input are also included. HDMI inputs are up to 1080p/60 compatible with Deep Color and xvYCC support. An backlit remote is included which controls all projector functions and is programmable for other devices. The projector responds very well when the remote is pointed at the screen. Also included is a 9-foot power cord. I was happy to see this as I am using a high shelf for the projector and the power is of course by the floor.

Installation is very easy and flexible with this unit. The throw range is quite large with the 2.0x zoom. You can project an image of 40” at 3’11” up to 200” at 39’4”. My theater uses a 92” Carada Brilliant White screen with a gain of 1.3. The throw distance is around 10’. Generous horizontal and vertical lens shift is available. You can go one full screen height above or below the lens axis. You can go about 40% off-center horizontally. The only caveat is if you max out one axis, you have less range on the other. There is rarely a reason to use horizontal shift for more than fine tuning however. I mounted my projector right around the height of the top of the screen and had no problem getting everything lined up. It’s critical for accurate geometry to have the projector and screen level and parallel in both planes. The front feet adjust independently for this purpose. I achieved a perfectly square and centered image. Focus from edge to edge was excellent with only the slightest aberration on the sides of a fine grid pattern. As with any 3-chip projector, convergence can be an issue and there is no adjustment for this available on the AE2000U. Fortunately, my unit had no problems. Color uniformity was excellent with only a barely perceptible green tint toward the right side. Focus and zoom are motorized so you can get right up to the screen and adjust them with the remote. Lens shift is accomplished with two dials on the top of the case. If you use a ceiling mount, these will point towards the floor.

The user menu has everything a tweaker (tweakaphile?) could ask for and more. You can fiddle to your heart's content and save all your work to one of 16 memories! The seven picture modes are labeled Dynamic, Normal, Color 1 and 2, and Cinema 1, 2 and 3. Color 1 measured almost perfectly to Rec 709. I did my initial calibration in this mode after running the lamp about 80 hours. All other parameters were very accurate and the projector was very easy to dial in. A complete set of grayscale controls are included as well as a three-point gamma control. I did all adjustments with the iris turned off. After calibration, I turned it on as it does improve shadow detail and black level quality. Though this projector won’t compete with a CRT or the new JVC RS2, its black level and gamma quality is superb, especially in my totally dark theater. There is a color management system which is quite unique. You display a target on the screen and sample a particular color. Then you can adjust Color, Tint and Brightness for that color. All you need to do is display a primary or secondary color pattern and adjust away! Unfortunately, this isn’t available in the Color 1 and 2 modes. After about a week of viewing, I decided to try adjusting the colors in Cinema 1. Initial measurements showed a bit of oversaturation but perfect decoding. After calibration, I was much happier with the overall image quality. I recommend Cinema 1 as the best mode for this display. If you have a color-neutral screen like the Carada, little adjustment is needed to the color space.

Video processing in the AE2000U is fair but not stellar. I engaged the Cinema Reality option to check out the inverse-telecine capability from standard DVD. Judder was reduced as expected but the overall image was softer when fed a 1080i signal from a Denon 2930CI. I preferred the picture with the Denon set to output 1080p. Even though there is some judder, the increased detail and almost total absence of artifacts is a worthwhile tradeoff. There is also a Detail Clarity control which I left on. It does a good job of reducing noise without softening the image.

Blu-ray image quality is simply amazing. If anyone is on the fence about whether to go for a new player, you won’t be if you see a movie on a quality 1080p display. It’s not just the increased resolution that’s in play here. It’s the total absence of video processing required to display the image. Blu-ray movies are almost exclusively encoded at 1080p/24. The data is decoded from the disc and output without modification. The AE2000U accepts the signal, does the YCbCr to RGB conversion and displays the signal at 96Hz. The appearance of an artifact-free and judder-free image must be seen to be appreciated. There is no more film-like display than this. Even real film must be projected under the correct conditions (mechanically sound projector, unworn print, color accurate light source) to approach what I’m seeing in my theater. The only drawback is how I’m going to afford to upgrade my entire DVD library to Blu-ray!

Obviously, I’m very happy with my purchase. If you’re looking for a comparison to the Epson 1080UB, here it is: these projectors are identical in image quality. I measured the same black levels from the AE2000U as I did from an Epson UB. You could pretty much toss a coin to decide which one to buy. The Panasonic is a bit quieter than the Epson but most people would not hear the difference unless the projector is right overhead. The only other difference is the Panasonic has an H-Fit aspect mode that will support an anamorphic lens setup. Doing a constant-height system with the Epson would require an external video processor. Other than that feature, you won’t be sorry with either projector. I’ve had the theater running for a few weeks now and I can say with certainty that I won’t be going back to a movie theater for the foreseeable future. The large high-quality image coupled with the amazing sound make for an experience far above any I’ve ever had in a commercial theater. There’s nothing like having an intimate space with the movie literally filling the entire space both visually and sonically with no extraneous sound whatsoever. Stay tuned for my Onkyo SR805 receiver review.

Thanks for reading and enjoy the view!

The Mancave is Alive!

As you may have already deduced, the mancave is now a full-blown theater. To see how the room evolved into its present form, check out this article. I've posted pictures below:

Here is a close view of the front speakers, Axiom M60, VP150 center and EP350v3 sub.

This is the focal point, a 92-inch Carada Criterion screen. The viewing area is 80"x45", 16:9 aspect ratio. Believe me, it's worth the extra $100 for the Criterion frame. It's super-stiff for a perfectly flat screen surface. It looks like a giant flat-panel TV!

Another view of the screen and front speakers. The center channel stand is by Axiom also. They will provide custom heights for no extra cost, really nice. All speakers and the stand are on spikes included by Axiom.

Here is the gear rack. It's a flexi built according to these instructions. It's amazingly solid. I put the acorn nuts on the bottom to act as feet. This makes the rack easy to pull out to reach the rear jack panels. The setup you see here is 100% digital. Only HDMI cables are used to connect the three source components. The Onkyo SR805 receiver is THX certified and decodes all lossless sound formats. It also features 8-point Audyssey room correction.

A closeup of the source components. On top is an Oppo 980 for SACD transport. This player outputs DSD over HDMI for a mere $169, amazing! The Panasonic BD-30 does a super job with Blu-ray and outputs all lossless sound formats as a bitstream. The only thing I don't like about it is that bright blue light on the front. Unfortunately, there's no way to turn it off. You can just see the Denon 2930CI peeking out below. This is still the best player out there for DVD upconversion. It's also built like a tank. I wish there were a Blu-ray player as good for under $1000. Is anyone out there listening?

Two views of the Axiom QS8 surround speaker. This a quad-pole design with midrange drivers on the top and bottom and tweeters on the vertical faces. These surrounds sound great in almost any placement position, they are very forgiving. The conduit below is cable raceway from Home Depot. It comes in white plastic with double-stick tape on the back. Stick to the wall, insert cable and paint for a finished look.

This is the shelf-mounted Panasonic AE2000U projector. This is a 3-LCD design using the latest Epson C2fine panels. Black levels are superb and the overall image is stunning. Adjustments are many and a near-perfect calibration can be achieved. Stay tuned for a full review and calibration report.

The Importance of Seating in Home Theater Design

I recently got the recliners pictured below delivered for my mancave project. I ordered them from the Theater Seat Store. I can't say buying furniture without trying it out first is the smartest thing I've ever done but they looked just perfect in the photos on the vendor's website and sure enough, they are! All seating surfaces are leather and the padding has the ideal firmness. They recline quite far back as you can see and can still be set pretty close to the wall. The chairs are made by Vanguard HTS and are called Charlize.

One warning about Theater Seat Store. They are a good company and their prices are very reasonable. Their shipping method however was not clearly spelled out. They advertise free shipping and it was indeed free. The problem arose when Fedex Freight called to schedule the delivery. They informed me that it was curbside only. The driver would be alone and he would not bring the 2 immense boxes weighing about 150 pounds into my house. I had to arrange for a friend to come over and help me. They do offer a "white glove service" which costs 10% of the purchase price. For that fee, they will bring the furniture in and unpack it for you. If you buy from Theater Seat Store, just be sure to have some strong help available when your seats arrive.

Once the seats were in place, I spent some quality time sitting in them and envisioning the display area at the front of the room. I had planned to build a flexi-rack to accomodate all the electronics with the center channel speaker and plasma panel on top. I say "had" because after staring at the wall for awhile, I had a revelation: why not a projector? I had considered a projector a few months ago and dismissed the idea based on cost and thinking "do I really want to sit 10 feet from a 92-inch screen?" I found a white sheet and folded it so it would match the dimensions of a 92-inch, 16:9 screen (80" x 45"). I taped it up on the wall and had my wife join me for a look. After about 1 minute, she said "why can't we get a projector?" Honest, this really happened. This is a milestone in WAF (wife acceptance factor) history.

I do plan more detailed reports on the projection setup in the near future but for now, here is the updated gear list:

Panasonic AE2000U LCD projector
Carada 92" Brilliant White screen (1.4 gain)
Panasonic BD30 Blu-ray player (just arrived today in fact)
Oppo 980 DVD player
Lumagen Vision HDP video processor
Onkyo TX-SR805 surround receiver
Axiom Epic 60 surround speaker system

As you can see, the seating makes a real difference in how you perceive a viewing environment. Because of my experience, I recommend making chairs among the first purchases. I originally designed this room around a purpose: ultimate sound and light control to allow me to choose any display I wished. The seating really changed my vision from a viewing room into a screening room. Oh yes, the cost, I did mention that earlier. It seems that the sub-$3000 portion of the projector market is white-hot right now. Epson, Panasonic, Sanyo, Mitsubishi and Optoma all have superb units boasting full 1080p and excellent image quality. Thanks to the information at Projector Reviews.com, I chose the Panasonic. My choice of the Carada screen was based on quality for the money. The reviews on it were all exemplary and the value is the best in the business. You can read more about there products here.

I'd better end this article before I get too far off topic. My advice: choose your seating and get it in your theater before you commit to any display. You may find the chairs will tell you how the rest of the room should be done. Thanks for reading and enjoy the view!

I'm Building a Mancave!

Yes, the time has come to build a room of my very own. I have a very nice setup in the living room currently but my thirst for high performance has left me wanting more. Here is a picture of my present setup:

It's hard to see the gear in this photo so here's a list:

• Samsung DLP TV, HL-R5067W (50")
• Denon AVR-3806 Receiver
• Denon DVD-2930CI Universal Disc Player
• Scientific Atlanta 8300HD Cable DVR
• Axiom M60 towers and VP150 center (not pictured: EP350 sub and QS8 surrounds)

It's all installed on a bench I built with a friend. It's great for movies but not so great for music. The main reason being the speakers are too close together and too high. I put them up on the bench to help clear the furniture. You can see the upholstered chair on the right side of the picture. This chair blocks the woofers in the right channel. This rig is in a corner which is less than ideal. Plus, there is a large opening to my dining room on the left and an open doorway in the rear. Sound absorption isn't bad with the upholstered furniture and a large carpet. Also, because I live in a duplex, I can't really run the sound at reference levels. I finally then got the OK from my wife to turn our unused bedroom upstairs into a dedicated theater room.

Here is my blank canvas:

This room is approximately 12'x12' with an 8' 6" ceiling. Not quite a cube luckily! The color on the walls is graphite with just a little bit of shine. I just painted it. I wanted a matte finish but the dark paints from Lowe's all had this finish. It's OK though since I'll be putting up sound absorbing panels and completely covering the windows. There will be carpet too, of course. A ceiling fan will replace the current fixture and I will be building a radiator cover to hide that eyesore. My first order of business will be the floor. This room is directly above the living room and I want to keep sound from going through the floor. To that end, I'm installing a layer of rock board and a layer of OSB under the carpet. This should provide sufficient mass to keep my music and movies from traveling into the room below. This room is also opposite the shared wall in my duplex so high volume won't be a problem for the neighbors.

Here is the proposed gear list:

• Onkyo TX-SR805 Receiver
• Samsung BD-UP5000 HD/BluRay Player
• Axiom M60, VP150, QS8, EP350 surround speaker system
• Panasonic TH50-PZ700U 50" plasma TV

I'm also planning more home-built furniture to hold all these goodies. I'll be building a flexi-rack for the gear and stands for the surround speakers and the TV. I'll finish it all off with a pair of theater recliners in leather of course. I'll control it all with another Harmony 890 like I use downstairs. Despite my less than glowing review of this unit, the latest software and firmware seems to be working perfectly. I haven't had to press the Help button in several months. Another piece of gear I hope to add to all this is a Lumagen video processor. I'm currently in the application phase of becoming a dealer for their products. They represent the ideal solution for an ISF calibrator. ISF in a box if you will. A Lumagen offers complete control over color, grayscale, gamma, geometry and even signal timing. And they do this for far less than competing units from Pixel Magic or DVDO. I'm really excited to be able to offer these products. When I get a few in, I'll be sure to post a complete review.

Please come back soon over the next few weeks as the mancave evolves. I'll post pictures and a blow-by-blow as the room moves toward completion. Thanks for reading and enjoy the view!