Pioneer 5020 and 6020 Calibrations

As I’ve mentioned in previous articles, it is now possible to calibrate the 9th-generation Pioneer non-Elite displays thanks to ControlCAL. Without this software, there is no access to white balance controls in the service menu making it impossible to calibrate these TVs any other way. It’s a good thing too because with a proper calibration, the 5020 and 6020 sets can nearly match the performance of an Elite TV in the Pure mode. While not quite the equal of an Elite display in ISF mode, you can save a bit of money purchasing the non-Elite TV and a pro calibration.

The procedure for calibrating these sets is similar to the Elites. ControlCAL accesses the service menu through the RS232 interface. Once activated, I am able to navigate the service menus and record all default settings before starting the actual calibration. It is important to note that the calibrated picture mode is Movie with Pure Cinema turned off. Turning on Pure Cinema after the calibration will actually change the grayscale settings. It’s not permanent but the calibration will obviously be affected as long as Pure Cinema is on. This is not a great loss as 24p material will still be displayed at 72hz with the proper 3:3 cadence. The only thing you will lose is inverse-telecine deinterlacing of 480i and 1080i material. You also must use Movie mode because the grayscale adjustments are global and affect all picture modes. All the modes will look a bit different but only Movie will have the proper D65 color temperature. The calibration is also global for all inputs. You cannot have separate setups per input or per picture mode. As most modern video source components are pretty much the same in terms of color, grayscale and gamma output, this is not a big deal. I saw excellent results with both cable/satellite sources and DVD/Blu-ray. I was able to verify that components such as the PS3 and the Pioneer BDP-51 Blu-ray player perfectly matched my signal generator.

Color performance is very good before calibration. The gamut is not quite as accurate as an Elite but it’s very close. Secondaries line up perfectly after calibration. I typically have not had to adjust the color or tint controls from the factory defaults. Luminances are also very close to perfect. Gamma is very flat but a bit under 2.2. It tracked closer to 2.1. Contrast performance is also excellent. I measured the same minimum black level of .001fl with a peak white level of 41.727fl. This translates to a measured On/Off contrast ratio of 41,727:1.

Once calibrated, the performance of the non-Elite TVs is still better than any other display I’ve worked on save the Elites. For a substantial savings over the Elite displays you still get the second-best TV in the world, and only by a small margin. While I heartily recommend the Elite for ultimate performance, the 5020 and 6020 represent a phenomenal performance bargain right now. The 5020 (50-inch) TV can be found for around $2000 and a 6020 (60-inch) can be had for just over $4000. Even adding in a pro calibration, you’re still ahead. Now that these displays can be properly calibrated with ControlCAL, they are well worth considering.

Pioneer 8G and 9G Plasma Calibrations

After calibrating many Pioneer plasmas over the last two years, I can say without reservation that this line of displays is the finest available. Impeccable build quality and a superb picture make these plasmas the ones to beat. While the Elite line includes all controls necessary for a professional calibration, the non-Elite TVs do not. The eighth-generation sets have grayscale controls in the service menu but the ninth-generations ones have none. This is unfortunate because the potential in image quality is the same for all Pioneer plasma displays.

I'm happy to say this has now changed. I recently acquired an application called ControlCAL. This windows program allows me to access the RS-232 interface available on ALL Pioneer plasma TVs. Through this interface, I have the ability to do a full calibration on ANY Pioneer plasma from both the eighth and ninth generation lines. ControlCAL allows access to the ISF Day and Night modes on the Elite models (eighth-gen PRO-110, 150 & 950; ninth-gen PRO-111, 151, 101 & 141) with all calibration controls in play. ControlCAL also allows a higher contrast setting on Elites so you can have a true daylight mode without any compromises. With these ISF memories properly calibrated, a user can simply select the appropriate mode with the remote to lock in all calibration settings with one button press.

The best part of all this is how inexpensive the ninth-generation non-Elite models have become. You can get the 50-inch 5020FD for around $2500 and the 60-inch 6020FD for around $3800. This is an incredible deal. There is no difference in picture quality between these and the more expensive Elite TVs. Now with ControlCAL, you can buy the cheaper set and pay for a professional calibration for hundreds less than just buying an Elite display. Of course, ControlCAL can be used with great success on Elite TVs including the new Elite monitors, the PRO-101 and 141. ControlCAL is the only way to activate the ISF modes, view panel hours or change the level of the side masks on Elite displays.

If you've lusted after a Pioneer Kuro as I have, now is your best chance to acquire one. You can save about $1000 by going for the 5020 or the 6020. ControlCAL now makes it possible to calibrate these displays for maximum performance. If you have any questions or you'd like to book a calibration appointment, please email me.

Thanks for reading and enjoy the view!